Remove Apple Watch display scratches yourself!
Published: April 25, 2022
Scratches are annoying!
Did you bump your expensive smartwatch into something and end up with your first scratch? Many people say you simply have to get used to it – that is not quite true. Our goal is that nobody has to live with it. With a simple DIY process based on a UV method and a special UV adhesive, scratches disappear quickly.
How can I remove scratches from an Apple Watch display?
There are hardly any good solutions on the market to make scratches on an Apple Watch invisible. That is why we developed the Zcratch UV Kit. Simply order the kit that matches your watch and carry out the repair at home using our video and text instructions. The process takes only 5–10 minutes, is repeatable and can be reversed at any time. Thousands of satisfied customers already use our product. If you run into questions during the application, our support is available almost 24/7.
Application: removing Apple Watch scratches
Important: the Zcratch UV adhesive must not be exposed to sunlight before use, otherwise it will harden.
Step by step
- Clean the display of your device from grease, dirt and dust.
- Apply the right amount of Zcratch UV to the center, depending on your model: 38/40/41/42 mm = ½ ml, 45 mm = 0.75 ml, 44/46 mm = 1 ml.
- Peel off the protective film on both sides, position the film sideways and lower it carefully.
- Place the Apple Watch face down on a folded tissue and let the Zcratch UV spread.
- Center the film if necessary.
- Cure the Zcratch UV under UV light.
- Remove adhesive residue and clean with isopropanol.
